Step 1: Attach the Side Support Arms
Align the left and right side support arms with the slots on the base. Push each arm down firmly until you hear a click. Ensure both sides are securely locked.
Step 2: Install the Upper Step
Align the upper step with the side support arms. Insert the bush and screw through both sides, then tighten securely using the provided tool.
Note: The package includes extra screws and rubber grips for replacement if needed.
Step 3: Attach the Potty Seat
Place the potty seat onto the upper support arms, aligning the screw holes. Insert the bushes and screws on both sides, then tighten securely using the provided tool.
Step 4: Attach the Soft Cushion
- Peel off the protective backing from the adhesive pads.
- Apply the adhesive pads to the marked positions on the potty seat base.
- Attach the adhesive pads to the back of the soft cushion.
- Align the cushion with the potty seat and press firmly on all sides to ensure it is securely attached.
Step 5: Install the Anti-Slip Rubber Grips
Insert the rubber grips into the designated slots underneath the potty seat until they are fully seated. This provides a secure, anti-slip fit on the toilet.
Final Safety Check
Before first use:
- ✔ Ensure all screws are tightened securely.
- ✔ Confirm all parts are fully locked in place.
- ✔ Check that the rubber grips are properly installed.
- ✔ Make sure the potty seat is stable before allowing your child to use it.
